CAB A8+ Manual del operador descargar pdf (Pagina 9)

9cab Produkttechnik GmbH & Co KG

1. Product Description

Characteristics of the Thermal Printhead

CAUTION !

The thermal printhead is the most sensitive part of your printer. Please

pay special attention to the following guidelines:

1) The glass cover on the printhead must not be touched with the hand. Also,

do not use sharp objects (knives, screwdrivers, etc) to clean the printhead.

2) Ensure that the printhead is properly adjusted at all times.

3) Make sure that there are no high spots or debris on your media to lodge on

or damage the printhead. The label surface must be smooth. Lower grade

direct thermal paper is very rough and will act like sandpaper on the head,

reducing the head's lifetime. Do not use low grade stock.

4) Clean the head at each change of ribbon, or with each new roll of direct

thermal media, with a special cleaning pen, or a cotton swab with isopropyl

alcohol.

5) Print with the lowest possible head temperature to increase the life of the

printhead.

6) When changing the printhead, first turn the power off and disconnect the

power cord. Then, place a clean paper towel or tissue under the head to

provide a clean surface for it to rest on. When removing the head, hold it

on the sides only.

Failure to observe the instructions above can lead to a reduced printhead life.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 9