CAB A8+ Manual del operador descargar pdf (Pagina 58)

58 cab Produkttechnik GmbH & Co KG

Parameter Meaning

Pause reprint Allows you to print additional labels

after finishing a print job by pressing

the key

Default : On

Error - Reprint Selection of automatically reprinting a

label after a correctable error has

been fixed.

Default : On

Width Setting the print width for ASCII dump

ASCII dump mode

Default : Automatic

Table 8d Overview of the "Print parameters" Menu (continuation)

Selection

Off

Automatic,

50mm to max.

print width

in steps of 5mm

Heat level

The "Heat level" parameter enables the printer to adapt to possible differences

in the thermal properties of the thermal printheads.

An adjustment has already been made in the factory. If the printhead must be

replaced, it is very likely the "Heat level" parameter will have to be adjusted.

To adjust the print for different print jobs, it is recommended that you make the

heat level adjustment with software. (e.g. for different materials and speed)

The heat level can be set using the software commands. The front panel value

and software command value will be totaled together when printing.

The setting of the "Heat level" parameter also affects the printer test prints (see

Test functions section).

Print speed

This parameter allows the adjustment of the print speed. This adjustment also

affects the printer test prints (see Test functions section).

The print speed can be set for each print job separately with software.

Changing the print speed with software does not change the basic adjustment.

8. Printer Configuration

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 58