CAB A8+ Manual del operador descargar pdf (Pagina 43)

43cab Produkttechnik GmbH & Co KG

4 19 20 5 16

Fig. 7f Loading Labels from Roll in Rewind Mode

12. In rewind mode, the rewind guide plate (19) must be mounted.

Remove the labels from the first 4 in (100mm) of the label strip.

Then, slide the media strip (4) around the rewind guide plate (19) to the

internal rewind hub (16) as shown in figure 7f. Slide the strip under the

clamps (20) that are located on the internal rewind hub (16). Hold the

internal rewind hub (16) and rotate the nut (21) counter-clockwise until it is

tight. The media strip now will be fastened to the internal rewind hub (16).

Rotate the internal rewind hub (16) counter-clockwise to tighten the media

strip.

13. Swing back the plate (8) to the print mechanism.

14. Lower the printhead by rotating the lever (5) counter-clockwise until it

stops.

8 21

7. Media Loading

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 43