CAB A8+ Manual del operador descargar pdf (Pagina 47)

47cab Produkttechnik GmbH & Co KG

1 27

4. Rotate the knurled knob (6) counter-clockwise to attach the roll of transfer

ribbon (4) onto the ribbon supply hub (5).

5. Slide a cardboard core (1) onto the ribbon take up hub (2). Attach the core

by rotating the knurled knob (3) counter-clockwise.

6. Feed the transfer ribbon along the path as shown in figure 7k and attach it

to the cardboard core (1) using a piece of tape or a label.

7. Turn the ribbon take up hub (2) counter-clockwise until the ribbon is taut

and without any wrinkles.

8. Swing back the plate (8) to the print mechanism.

9. Rotate the printhead lever (7) counter-clockwise until it stops, thereby

locking the printhead into position.

Fig. 7k Path of Transfer Ribbon

7. Media Loading

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 47