CAB A8+ Manual del operador descargar pdf (Pagina 113)

D-5cab Produkttechnik GmbH & Co KG

Fig. D-5 Changing Print Roller (II)

5. Remove the print roller (1) from the shaft (10)

CAUTION !

Before assembling the new roller check if the keys (11) is placed correctly

in the shaft (10) !

6. Slide the new print roller onto the appropriate shaft. Make sure the groove

in the axle of the roller (1) is aligned to the key (11) on the shaft (10).

7. Reinstall the plate (6) and printhead support (4).

8. Tighten the screws (5a, 5b) and the pin (8).

9. Reassemble the tear-off plate (2).

110

Appendix D - Replacing Assembly Units

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 113