CAB A8+ Manual del operador descargar pdf (Pagina 40)

40 cab Produkttechnik GmbH & Co KG

Loading Labels

Fig. 7c Label Loading in Tear-off Mode

Loading Labels from Roll

1. Open the cover (1).

2. Loosen the knurled screw (13), swing the media retainer (14) upwards and

slide it out as far as possible.

If you are using material that is the same width as the previous material,

just swing the media retainer (14) upwards.

3. On the media hub are two adapters (11). After loosening the knurled

screws (12) these adapters can be moved on the media unwinder (10).

Slide one adapter near to the chassis (15).

Slide the second adapter to such a position that the distance between the

outer edges of both adapters is a little smaller than the width of the label

roll.

Secure both adapters by tightening the knurled screws (12).

5 6 7 8

7. Media Loading

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 119 120

Sin comentarios

CAB A8+ Manual del operador Pagina 40