CAB Apollo 1 Manual del operador descargar pdf (Pagina 104)

104 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

Keyboard Adapter

The keyboard adapter option offers to connect the Apollo to a standard PC

keyboard or any other compatible input device (e.g. a bar code scanner) via its

serial interface. Using the keyboard, print jobs of an internal PC card may be

loaded and variable data may be altered. Input data requests as well as data

received from the keyboard will be shown in the display of the Apollo.

The keyboard adapter is designed for use with all keyboards which fulfill the

following requirements : MF-2 compatible, having a 5pin DIN plug, supporting

code set 3, and also operating with a maximum of 15 kBaud.

CAUTION !

The current consumption of the connected keyboard or scanner must not

exceed 100 mA.

Installation of the Keyboard Adapter

Fig. 13 v Keyboard adapter

1 - 25 pin SUB-D plug

2 - 5 pin DIN connector

1. Change the interface setting to "RS232C, 9600 Baud, RTS/CTS" and

confirm.

2. Connect the 25 pin plug (1) of the keyboard adapter to the serial interface

connector at the rear of the printer.

Make sure that the printer is switched OFF !

3. Connect the keyboard to the 5 pin DIN connector (2) of the keyboard

adapter.

1 2

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 138 139

Sin comentarios

CAB Apollo 1 Manual del operador Pagina 104