CAB Apollo 1 Manual de usuario descargar pdf (Pagina 7)

cab - Produkttechnik GmbHENG-6

Loading Transfer Ribbon

7642

5432

1. Open the cover.

2. To lift the printhead, turn the printhead lever (1) clockwise until it stops.

3. Slide the roll of transfer ribbon (5) onto the ribbon supply hub (6) as far as

possible.

Pay attention to the side of the ribbon material which is coated with ink !

The inked side is generally the dull side. When the ribbon is inserted, the

inked side must face the opposite side of the printhead !

In figure, the solid line shows the path of inside wound ribbon, and the

broken line represents the path of outside wound ribbon.

4. Hold tight the ribbon supply hub (6) and rotate the knurled knob (7) clockwise

until it stops. That way the roll (5) will be attached at the ribbon supply hub (6).

5. Slide an empty cardboard core (2) onto the ribbon take up hub (3) and fix it by

turning the knurled knob (4) clockwise.

6. From the side, feed the transfer ribbon along the path as shown in

figure, then attach it to the core (2) using adhesive tape or a label.

7. Turn take up hub (3) in order to smooth and stretch the ribbon.

For Apollo 1, first turn the lever (1) to a central position between the locked and

unlocked positions.

8. Turn the lever (1) counter-clockwise until it stops and, thereby, lock the

printhead.

9. Close the cover.

Apollo 1 Apollo 2/3

3 5 6 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Sin comentarios

CAB Apollo 1 Manual de usuario Pagina 7