CAB Apollo 1 Manual de usuario descargar pdf (Pagina 5)

cab - Produkttechnik GmbHENG-4

Print Media

The Apollo can be operated in direct thermal as well as thermal transfer mode.

For direct thermal mode, only use print material with a thermal-reactive coating.

In thermal transfer mode, not only standard paper labels are needed but also the

thermal transfer ribbon with a color surface. It is possible to pre-set in the setup

either the direct thermal mode or the thermal transfer mode, but the setting can be

changed for every print job via software.

The Apollo is able to print on labels and continuous paper from supply rolls.

The printer can also process fanfold label material.

Label/Tag Media Specification

Item MINIMUM MAXIMUM

A Label width .5 (12) 4.6 (116)

B Width of silicon liner .5 (12) 4.6 (116)

C Label length .2 (5) 21.5 (546)*

D Gap between labels .08 (2) 21.5 (546)*

E Label thickness .0024 (.06) .01 (.25)

F Thickness of silicon liner .0024 (.06) .01 (.25)

G Distance of the first printing position

from the edge of the silicon liner .08 (2)

H Distance of the label sensor

from the edge of the silicon liner .12 (3) 1.9 (48)

For special materials

I Width of punch hole .2 (5) -

K Height of punch hole .08 (2) .2 (5)

L Width of reflective mark .2 (5) -

M Height of reflective mark .08 (2) .2 (5)

* Apollo 3 : 37.2 (945), Apollo 3/300 :16.6 (427) Dimensions in inches (mm)

1 2 3 4 5 6 7 8 9 10 ... 32 33

Sin comentarios

CAB Apollo 1 Manual de usuario Pagina 5