CAB Apollo 1 Manual de usuario descargar pdf (Pagina 20)

ENG-19cab - Produkttechnik GmbH

Mounting the Printer Adapter

In order to operate the external rewinder, an adapter unit has to be mounted on to

the Apollo.

1. Attach upper adapter plate (2) to the lower adapter plate (3) using the knurled

screws (1). Put the screws through the circular holes in the upper adapter

plate.

2. Rotate the accessory lock/release lever (7) counter-clockwise until it stops.

3. Remove the tear-off plate (4) from its mountings (6).

4. Insert the printer adapter plate (5) into the mountings (6).

5. Turn the lock/release lever (7) clockwise until it stops.

6. Adjust the lower adapter plate (3) vertically until only a space of about .08 in or

2 mm is left between the adapter plate and the standing area.

7. Tighten the screws (1).

1 2 3

6 7

Mounting the Guide Bar

1 2 3 4

1 - Rewinder

2 - Upper threaded hole

3 - Guide bar

4 - Screw (incl. washer)

Using the hex screw (4) and washer provided, secure the guide bar (3) into the

upper one of the two threaded holes (2) located on the inside of the rewinder's side

cover. A hexagonal wrench is provided.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Sin comentarios

CAB Apollo 1 Manual de usuario Pagina 20