CAB Apollo 1 Especificaciones descargar pdf (Pagina 175)

D/29

- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

Epicycloidal reduction gear

Oil change

(ﬁg.53/D - ﬁg.54/D - ﬁg.55/D)

1. Stop the vehicle on a ﬂat, level surface with differential

oil still hot.

2. Switch off the engine and remove the ignition key, hang up

a sign in the cab that reads “maintenance work under way”.

3. Place a container under the drain plugs to collect any oil

which may come out during replacement.

3. Turn the wheel hub (fig.53/D Pos.”1”) so that the in-

let (fig.54/D Pos.”M”) is moved to the lower position

(ﬁg.54/D), and then remove the oil cap.

4. Allow the oil to completely drain out.

5. Turn the wheel hub so that the inlet (ﬁg.55/D Pos.”M”) is

moved to the middle position (ﬁg.55/D).

6. Fill the reduction gear to level via the inlet (ﬁg.55/D).

The level is correct when oil comes out from the oil cap.

7. Replace the epicycloidal reduction gear cap and tighten

it securely.

8. Repeat all the operations for each of the four reducer units.

(ﬁg.53/D)

(ﬁg.54/D) (ﬁg.55/D)

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 233 234

Sin comentarios

CAB Apollo 1 Especificaciones Pagina 175