CAB Apollo 1 Especificaciones descargar pdf (Pagina 172)

Maintenance and Registering

D/26

Mod. Apollo

- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

(ﬁg.44/D) (Boom raising cylinder block valve)

CYLINDER BLOCK VALVES

Cylinder block valves hinder uncontrolled movement of the

cylinder pistons in case of lacking hydraulic or bursting pres-

sure of a ﬂexible pipe.

The valves are directly mounted on the cylinders.

Verifying proper operation of cylinder non return valves

- ATTENTION:

Do not allow anybody near the vehicle while these checks are

being carried out.

- ATTENTION:

One movement at a time should be checked during veriﬁcations.

- ATTENTION:

In the event of malfunction, do not use the vehicle until it has

been repaired.

A) Boom raising cylinders: (ﬁg.44/D)

1. Start up the engine. Make sure that the parking brake is

engaged and the transmission in neutral.

2. Lift the boom to a 45° angle.

3. When the engine is running at 1400 RPMs, engage the

control lever to lower the boom. During boom movement

stop the engine. The boom must slow down and stop as

the engine slows down and stops.

If the boom continues to move even after the motor stops,

the boom raising cylinders are faulty. Repair the defect as

quickly as possible, contact a DIECI service centre.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 233 234

Sin comentarios

CAB Apollo 1 Especificaciones Pagina 172